How to Calculate Your Offer Price When Buying a Business in Australia
The asking price is not the offer price. That distinction sounds obvious, but most first-time buyers skip straight from "what's the seller asking?" to "can I afford that?" — and never actually build their own number.
A business offer price in Australia is calculated by normalising the business's earnings, applying an appropriate multiple for the industry and risk profile, then adjusting for working capital, assets, and anything your due diligence turned up. The result is a range, not a single figure — and knowing your walk-away number before negotiations start is the whole game.
Here's how to build that number from scratch.
Step 1: Start With Normalised EBITDA (Not the Seller's)
EBITDA — earnings before interest, tax, depreciation, and amortisation — is the standard profit measure for small business valuations in Australia. But the raw figure in the seller's accounts is almost never the right starting point.
Sellers run personal expenses through the business. They pay family members above-market wages. They depreciate vehicles they also use on weekends. They take a below-market salary to make the profit look higher. All of this needs to be unwound.
Normalised EBITDA (sometimes called Seller's Discretionary Earnings or SDE for owner-operated businesses) adds back one-off items, non-arm's-length expenses, and adjusts the owner's salary to what you'd actually pay a manager to do the job.
A concrete example: a plumbing business shows $280,000 EBITDA in the accounts. Add back the owner's $40,000 car (personal use), remove the $60,000 salary paid to their spouse for bookkeeping you'd outsource for $15,000, adjust the owner's draw from $80,000 to a $130,000 market rate for a qualified tradesperson-manager. Normalised EBITDA: around $215,000. That's the number you're applying a multiple to — not $280,000.
This process is called how to normalise EBITDA, and getting it right is where most buyers either save or waste six figures.
Step 2: Apply the Right Multiple
Once you have normalised EBITDA, you multiply it by an industry-specific earnings multiple to arrive at the enterprise value — the value of the business as a going concern.
For Australian trades and service businesses, typical EBITDA multiples run:
- Cleaning, lawn mowing, rubbish removal: 1.5x to 2.5x
- Plumbing, electrical, HVAC: 2x to 3.5x
- Pest control, landscaping: 2x to 3x
- Specialised trades (fire protection, refrigeration, solar): 2.5x to 4x
- Businesses with long-term contracts or recurring revenue: add 0.5x to 1x to base range
These ranges aren't fixed. The multiple moves based on what you're actually buying — a sole operator with no systems and all the revenue tied to their personal relationships is worth less than a business with five technicians, a job management system, and $400,000 in annual maintenance contracts.
For a detailed breakdown by industry, see EBITDA multiples for trades businesses.
A useful rule of thumb: in Australian blue-collar services, most businesses under $500,000 EBITDA sell at 2x to 3x. Under 2x and you're buying a distressed business or a job. Over 3.5x and you need very strong justification — usually recurring contracts, geographic exclusivity, or a genuinely scalable operation.
Step 3: Understand the Difference Between Enterprise Value and Equity Value
This is where a lot of buyers get confused, and sellers exploit that confusion.
Enterprise value is what the business is worth as an operating entity. Equity value is what you're actually paying — enterprise value minus (or plus) certain balance sheet items.
Enterprise value: $600,000 (3x on $200,000 normalised EBITDA)
Then you adjust:
- Debt assumed: if the business has a $50,000 equipment loan you're taking on, subtract it from your offer or factor it into the total cost
- Excess cash: cash sitting in the business above what's needed to operate day-to-day flows to the seller, not you
- Working capital: more on this below
This is the stuff that gets sorted out in the sale and purchase agreement — but you need to understand it before making an offer, not after.
Step 4: Work Out the Working Capital Adjustment
Working capital is the cash tied up in running the business — accounts receivable minus accounts payable, plus stock and WIP. In most small business sales, there's a "normal" level of working capital that gets included in the price.
If the business has historically run with $80,000 in net working capital and you settle with only $30,000 in the business, the seller has effectively extracted $50,000 from the entity — and you'll need to inject that cash to keep operations running smoothly from day one.
This is why working capital targets get negotiated into the SPA, and why understanding the working capital adjustment can change your effective purchase price by tens of thousands.
For a small service business with minimal debtors and no stock, this is usually straightforward. For a building company with $200,000 in WIP and $150,000 in creditors — it gets complicated fast.
Step 5: Adjust for Risk (the Due Diligence Discount)
Here's where your offer price diverges from pure arithmetic. You've done your numbers on paper. Now you've actually looked at the business — and you've found things.
Common risk factors that justify a lower offer:
- Customer concentration: one customer is more than 20-25% of revenue (I've seen businesses where one client was 60% of turnover, and the owner called it "a great relationship" rather than a risk)
- Key person dependency: the revenue walks out the door if the current owner leaves
- Undocumented processes: the whole operation runs in one person's head
- Deferred maintenance: equipment that needs replacement in year one or two
- Weak financials: BAS lodgements don't reconcile with the P&L, one strong year out of three
Each of these reduces what the business is actually worth to you as an incoming owner — even if they don't change the headline EBITDA multiple.
The practical approach: quantify the risk and express it as a dollar adjustment. If the business needs $60,000 of equipment in the next 12 months that isn't reflected in the price, that's a $60,000 reduction. If there's high customer concentration that would require 12 months of remediation effort, estimate the cost of that work and reduce accordingly.
For more on this, how to avoid overpaying for a business goes into the specific adjustments worth making.
Step 6: Calculate Your Walk-Away Number
Your offer price is a range. The top of that range is what you'd pay if everything checks out exactly as presented. The bottom is your walk-away number — the point at which the deal doesn't work and you don't do it.
A simple framework:
- Top of range: normalised EBITDA × industry multiple (at the high end) = enterprise value. Subtract assumed debt. Add or subtract working capital adjustment.
- Bottom of range: same calculation at the low end of the multiple, plus a risk-adjustment discount for anything concerning in due diligence.
If your bottom-of-range number is higher than the asking price, you've found a deal worth chasing hard. If the asking price is above your top-of-range number, you're probably wasting each other's time — or you need to fundamentally reassess your assumptions.
The mistake most buyers make is starting negotiations from the asking price and working backward. Build your own number first. This is covered in depth in Module 4 of the Playbook.
What to Do With This Number
Once you have a price range, you use it to:
- Filter deals fast. If the asking price is at 4.5x on a one-man landscaping business with no systems, you can decline politely and move on without wasting anyone's time.
- Structure your letter of intent. Your LOI price should be defensible from your analysis — not a random number.
- Set your due diligence priorities. The assumptions that most affect your offer price are the ones to verify hardest.
- Renegotiate after due diligence. If you find something material, your pre-built number tells you exactly how to adjust.
Want the full framework? Grab the free Offer Price Calculation Framework — a step-by-step template that walks you through normalised EBITDA, multiple selection, working capital adjustment, and risk discounts in a single spreadsheet.
Frequently Asked Questions
How much is a business worth with $1,000,000 in revenue in Australia?
Revenue alone doesn't determine value — profit does. A service business turning $1,000,000 in revenue with $200,000 normalised EBITDA might be worth $400,000 to $600,000 at 2x to 3x. A business with the same revenue but only $80,000 profit is worth significantly less.
Is a business worth 3 times profit?
Three times EBITDA is a common benchmark for Australian trades and service businesses, but it's a midpoint, not a rule. Businesses with strong recurring revenue, documented systems, and low owner dependency can achieve 3.5x to 4x. Sole operators with no contracts often sell at 1.5x to 2x.
How do I calculate the valuation of a small business in Australia?
Normalise the EBITDA (remove personal expenses, adjust owner salary to market rate), apply an industry multiple, then adjust for working capital, assumed liabilities, and risk. Your offer price equals enterprise value minus net debt plus or minus the working capital adjustment.
How much deposit do I need to buy a business in Australia?
Most Australian bank lenders require 30-50% equity for a business acquisition, with the balance financed by a commercial loan or vendor finance. The deposit requirement is based on the total purchase price plus working capital, not just the enterprise value.
What's a fair offer price for a trades business in Australia?
For a typical plumbing, electrical, or HVAC business with 2-5 staff and $150,000 to $400,000 normalised EBITDA, a fair offer is usually 2x to 3.5x earnings — so $300,000 to $1.4M depending on the business quality. The specific number depends on contracts, systems, and owner dependency.
The Bottom Line
The asking price is the seller's number. Your offer price is yours — built from first principles, not negotiated down from theirs.
Normalise the earnings. Apply a defensible multiple. Adjust for working capital, debt, and risk. Know your walk-away figure before you pick up the phone. That's the whole framework.
If you found this useful, The Leveraged Worker newsletter goes deeper on this every week — real deal analysis, valuation examples from businesses I've looked at, and the specific mistakes that cost buyers money.